Tim’s Garage Cabinets

Tim’s Garage Cabinets

Tim had just bought this new home in Granville, Prescott Valley, and wanted to save some money on garage cabinets.

We ordered the conventional cabinets from Nelson Cabinetry, and I made the monster at the end of the garage.

The “monster cabinet” at the end of the garage was made out of 3/4 inch MDF & painted a matching gray color. The doors utilize sliding door hardware. Although the doors have pulls, I thought it would be a good idea to add chains to open the doors from the ground.

Gina’s Townhouse Remodel

Gina’s Townhouse Remodel

I run a few Craigslist ads to get work and that’s where Gina found me.

She had quite the list for what she wanted doing and had to narrow it all down to what was most important. But my 1st job was for her sister who needed an exterior blind hung, some curtains hung, and a large painting.

My 1st job for Gina was a fireplace surround using white shiplap (see in pics), which I did in September 2020. But her foremost project was to replace the countertops, and she would be painting her laminate cabinets. Gina was taken aback with the prices she got from Lowes and Home Depot: they wanted upwards of $3000 for Formica countertops. I supplied them for $500 (see in pics) plus laminate cost.

I also did her subway-style tile backsplash, hung a few lights, replaced a fan, some drywall repair, and framed a mirror wal

Maple Alcove Cabinet, Floating Shelves and Utility Alcove Shelves

Maple Alcove Cabinet, Floating Shelves and Utility Alcove Shelves

Custom Cabinetry with Floating Shelves with a Four Wall Scribe

This was a job for Ramido Alvarez’s residence. He is the owner of Home Tech Foundations Systems, Inc. I did a kitchen install for him about 10 months prior for a house that he flipped (one of my 1st jobs & didn’t get pics).

Reshape an Island and Make it (much) larger

Reshape an Island and Make it (much) larger

This is a job I got from Bobby Dixon, owner of Tri-City Home Improvement Pros. As you might notice, these cabinet doors are very different – and it’s a first for me, just seeing them. But of course, there’s no one who deals knotty alder up here in Prescott, AZ, so I had to go see one of my old suppliers in Phoenix, Spellman Hardwoods. They had it all: lumber & various 4×8 sheet goods I needed. They even planed the lumber to 3/4 (for a fee), while I waited.

I had to make 2 cabinets, 2 doors, a few pieces of trim, and I replaced 2 door panels with glass.

 

A Few Small Wood Working Jobs

A Few Small Wood Working Jobs

Farmhouse Paneling for Island Kitchen

This is for a ranchette in Dewey AZ.  She has horses, chickens, and three prized papillon pooches.

 

Staircase for Karen with 45 Degree Slope

This is a bit more slope than usual, or what could be permitted. But we didn’t have any inspectors look at it.

Rustic Reclaimed Wood Outdoor Flower Boxes, and Picture Frames

I got lucky and found some FREE weathered fence boards. So I made some stuff – a planter box and some picture frames. I also made a rustic reclaimed wood sliding door TV cabinet with some of this. And I have more to use for my living room tables (coming soon).

Thomas’ compact kitchen with New White Shaker Cabinets

Thomas’ compact kitchen with New White Shaker Cabinets

I planned out the kitchen, and Thomas ordered the cabinets from Nelson Cabinetry.

You might have seen their ads on Craigslist. Their website is nelsonkb.com.

White Shaker Style Cabinets, RTA (ready to assemble).

  • All Wood Construction
  • Plywood box
  • Maple Frame and Drawers
  • Maple Wood Doors
  • Soft Close Doors and Drawers
  • High Quality Hardware Made by DTC
  • Premium Full Extension Drawers
  • Dovetail Drawer Construction
  • Stained/Finished Sides
  • Base and Wall Cabinets come with Shelves

Verified by MonsterInsights